Terex Finlay I120RS

Used Terex Finlay I-120RS Track Impact, (234 Hours)

Engine - Tier 4 Final /Stage IV: Scania DC9 257kW (350 HP) Engine Serl. 7438861, Mfg Date

Terex CR038 Impact Chamber

Fully Hydraulically Assisted Apron Setting and Hydraulic Apron Release

Manual Raise Chamber Flap Allowing Extra Inlet Clearance

Direct Drive Via Clutch

Drive Belt Tensioner Wheel

Blow Bar Lifting Tool Supplied

Drive Pulley to Suit Higher Speed Range

Upgrade Option: Rotor Fitted With 2 Full Martensitic Ceramic & 2 Low Martensitic Blow Bars

Selectable Discharge to By-Pass Conveyor or Main Conveyor

Blanking Mat

Upgrade Option: Independent Pre-Screen C/W Hydraulically Folding and Locking Hopper and Blanking Mat.

50mm Cassette Spacing & 38mm Mesh as Standard - Mesh Apertures Available Upon Request

Upgrade Option: Independent Pre-Screen Hopper Extensions – Hydraulically Folding

Upgrade Option: Stepped Pre-Screen Punch Plate

1100mm (43.3") Belt Full Length

Upgrade Option: Under Crusher Vibratory Feeder with Wear Resistant Steel Liners (C/W Shortened Main Conveyor)

Hydraulic Raise/ Lower for Magnet

Upgrade Option: Bypass Conveyor With 650mm Wide Plain Belt, Discharging to the LHS Of the Machine.

Upgrade Option: Twin Pole Over Band Magnet C/W Stainless Steel Skirting & Stainless-Steel Discharge Chute, Discharging to RHS Of the Machine. Standard.

3.66m X 1.52m (12' X 5') Two Deck After Screen C/W 50mm Top Deck And 40mm Bottom Deck Mesh as Standard Unless Otherwise Stated

500mm (20") Wide Belt Single Transfer Conveyor Collecting Material from Both Decks.

500mm (20") Wide Belt Hydraulic Folding Re-Circulating Conveyor Able to Slew for Stockpiling Oversize Material

1400mm (55") Wide Belt Fines Conveyor

Rapid Detach After Screen System for Flexibility

Upgrade Option: Belt Weigher

Upgrade Option: Additional Transfer & Stockpile Conveyor for Collecting Material from Each Individual Deck of Screen Box. Giving Middle Grade Product - Only Available with RH Bypass Conveyor

Standard Oils - (Recommended for Ambient Temperatures Between -5 To +30°C)

Piped For Dust Suppression C/W Spray Bars

Emergency Stops

Handheld Track Control Set with Connection Lead

T-Link Telemetry System

Radio Remote System: Operational Controls of Machine (Auto Start/Stop) & Track Movement

Upgrade Option: Pressurized Air System for Electrical Control Cabinet

Safety Guards in Compliance with Machinery Directive